PUR flat laminating machine scope of application
PUR flat laminating machine is suitable for all kinds of MDF, MDF, fireproof board appearance paste various colors of PET, PVC, PP, wood grain paper, tin foil paper, solid wood veneer and so on. This machine automatically dust, glue, plate heating, veneer, cold pressure, pressure, disconnect continuous work, high level of automation, veneer effect is good, without the use of other equipment pressure, is the veneer gypsum board factories, cabinet door panel factory, decorative materials company board decorative veneer mask ideal equipment.
In the process of use, the package data is determined by the service life of the PET flat pasting machine, when the profile moves in accordance with the direction of the bail, PUR flat pasting machine coated with adhesive decorative materials through the pressure rollers, molding wheels tumbling point by point to complete the composite work of both. The machine does not start because the voltage is not enough, the input wires are different, the power cord is connected in reverse; assuming that the equipment is incorrect and the temperature measurement is inaccurate
The vacuum gauge will be damaged if the gas line is not working; the main power supply often leaks and trips, which is a big hidden danger: if the vacuum value is not up to the requirement, it will not only leak, but also cause membrane quality problems; during the manufacturing process - make sure that the surface is wet and polished in place, otherwise there will be problems with the quality of the membrane pay attention to whether the hand valve is open or not, avoiding the Membrane absorption when pulling downward, the heating temperature should not be too high, it will cause breaking phenomenon.
In the PUR flat pasting machine in the operation process, assuming that defects are found, you need to make PET pasting machine stop working in time, and then technicians stop checking and maintenance. Defects can continue to run before cleaning. When lifting the wrapping drum, you need to stop using both hands and pay attention to check whether there are people or obstacles under the wrapping drum to prevent the risk of attack.After the PET flat laminating machine is shut down, you need to stop cleaning in time to keep the machine clean and sanitary.
