Home » Knowledge » Content
Product Categories

Maintenance and maintenance of the coating machine

- Jul 04, 2018 -

1. The working environment should be kept clean to prevent dust from falling into the rubber coating system and affecting the quality of the coating.

2. After the first use of the lubricating oil in the reducer, the new lubricating oil should be replaced, and then replaced every six months. When the workload is large, replace it once every three months. When the temperature is high in summer, the viscosity of the reducer should be replaced. When the temperature is low in winter, the gear oil with low viscosity should be replaced. Transmission system: sprocket drive, the chain part is added with butter once a month. In the case of a gear transmission system, the turbine seat should be greased once every two weeks. If the turbine seat is oil-free, the butter should be added twice a week.

3. After the work is completed, the total power must be turned off.

4. When repairing or adjusting parts, they should be handled by relevant professionals.